As an Amazon Associate, we earn a small commission from qualifying purchases at no added cost to you.

How to Get Rid of Brown Well Water: 4 Reasons and Easy Solutions

No one likes to fill their bottles with brown water. Plus, it might be harmful too. So, it is better to get rid of that color and keep the water the way it’s supposed to be—colorless. However, to remove it, you must know what’s causing your water to turn brown in the first place. Let’s dive into the solutions regarding How to Get Rid of Brown Well Water.

How to Get Rid of Brown Well Water: Simple and Easy Solutions

Why Makes Well Water Turn Brown?

Rainwater percolates into the soil and reaches the aquifer that stores the drinking water. Now, while seeping into the soil, the water may collect certain particles that color it brown. The well water comes straight from the aquifer, which acts as a barrier to filter out most of the water’s contaminants. However, it cannot filter out all the impurities. Some of them reach your water and color it brown.  

There may be several causes for the brown color of your well water. However, contamination is not always the reason for the brown color. There are some natural reasons as well, which aren’t harmful to your health. Still, it’s better to get it removed. 

So, let us expose the reasons one by one and know how to get rid of the brown color.

Iron Ore

One of the major reasons for brown well water is the presence of iron ore in it. However, iron is an important mineral for our diet and isn’t harmful to our body if we drink it.

But still, you might want to remove it because the brown color strains your clothes and dishes while you are washing them. Plus, it causes plumbing fixtures. Moreover, you might not like drinking brown-colored water either!

How to Get Rid of Brown Well Water: If it has Iron

The best way to remove iron from well water is to use a water softener system. It is mainly used to remove magnesium and calcium from the water, but it removes iron. 

You can also try the following methods to remove iron:

  • Filtration
  • Greensand
  • Ion Exchange
  • Aeration


The presence of tannins in your well water can also cause it to turn brown. Tannins generally come from the leaves, barks, seeds, or fruits of plants. So, if there are leaves on the ground and water percolates through them to go into your well, then you might get brown water.

Tannins aren’t harmful to your health. But again, the brown water can leave a stain on your clothes. Moreover, the presence of tannins changes the taste of water. So, it’s better to get them removed.

How to Get Rid of Brown Well Water? If it has Tannins

The easiest and cost-effective method to remove tannins is to keep sweeping the ground to remove leaves, barks, or other plant debris. But still, you might not be able to get all of it out. So, if this method works for you, that’s perfectly fine. But if it doesn’t, you might have to go for a rather costly method.

Ultimately, you would require installing an ion exchange system, a reverse osmosis system, and an oxidation system to get rid of tannins. Plus, you will have to employ a professional plumber to do the proper installation. This process is a little expensive. So, before installing the systems, make sure that tannins are the actual cause behind your well water’s brown color.


Silt may be another reason why you get brown well water. Silts are sediments like suspended particles, leaves, organic matter, or other impurities that get mixed with your water and turn it brown.

And this is something that might cause health problems. So, if you are facing this issue, you must immediately try to get rid of it. You can tell if your water has silt by allowing a glass of water to rest for a few hours and checking if any sediment accumulates at the bottom.

How to Get Rid of Brown Well Water: If it has Slit

The reason why silts get to enter your water system is that your pump is too low for the lowered water table. Thus, the best way to fix it is to move the pump higher.

However, if that is not the reason, then try installing a filtration water system with good drilling. That would solve the problem.


Don’t confuse this issue with iron ore, although they might appear to be the same. When it comes to rust, it’s not the well water but the pipes causing the issue. 

It’s very easy to detect the issue. If one or two of your taps are throwing brown waters, then that simply means that it’s the rust in the pipes. And, if only the hot water tap is producing brown water, then there might be rust in your heater. 

How to Get Rid of Brown Well Water: If it has Rust

First check which the real culprit is—is it the tap or the heater. And then call a plumber to get it fixed. You can either get the rusts removed from the pipes or can replace the pipes altogether. If the problem is with the heater, then you might flush it out.

If your house was shut off for some time, then the brown water might be a temporary issue caused by dislodged rust. This would probably sort itself out if you leave the tap running for a certain period.


These are the four main reasons why your well water gets its brown color. Make sure you first know the exact cause before you try the methods to fix it. If you cannot find out the real reason, call an expert to detect the issue first. They would perform certain tests to know what’s causing the problem and offer the solution accordingly.

Drinking pure and clean water is crucial for survival. Drinking brown water might cause several health problems. Moreover, we need colorless water to wash our clothes clean. So make sure that you get rid of brown well water to have a safe and healthy lifestyle.

Leave a Comment